Use your Android phone as a wireless webcam that doesn't freeze.
Most phone-webcam apps freeze or go black when the Wi-Fi hiccups, because they wait for every lost bit of video to be resent. PhoneCam just skips what was lost and keeps going: you may see a small glitch for a moment, but the picture never stops.
Under the hood: hardware H.264, served as a standard RTSP stream with RTP over UDP. Works
with ffmpeg, VLC, OBS and anything else that opens rtsp:// URLs; no extra software needed on
the computer.
-
Download
PhoneCam-v000.apkfrom the latest release on the phone and open it. Android will ask you to allow installing apps from your browser or file manager. (Or build it yourself.) -
Open PhoneCam and tap Start streaming. It shows a URL like
rtsp://192.168.1.23:8554/cam. -
Preview it on your computer (same Wi-Fi).
ffplaycomes with ffmpeg and opens the stream in a window, which is a quick way to check that everything works before using it as a webcam:ffplay -fflags nobuffer -flags low_delay -framedrop -max_delay 0 -reorder_queue_size 0 \ -rtsp_transport udp rtsp://<phone-ip>:8554/camThe flags turn off buffering so the preview is close to real time. Close the window (or press
q) to stop; the phone's camera turns off about 10 s later.
The camera only turns on while someone is watching, and keeps working with the screen off.
sudo modprobe v4l2loopback video_nr=11 card_label=PhoneCam exclusive_caps=1 # once per boot
ffmpeg -fflags nobuffer -flags low_delay -max_delay 0 -rtsp_transport udp \
-i rtsp://<phone-ip>:8554/cam -vf format=yuv420p -f v4l2 /dev/video11 # keep running
Then reload the meeting page and pick the PhoneCam camera. Holding the phone upright? Use
-vf transpose=1,format=yuv420p.
The modprobe line only lasts until reboot. If you'd rather have the camera device created
at every boot, you can set that up yourself (optional):
echo v4l2loopback | sudo tee /etc/modules-load.d/v4l2loopback.conf
echo "options v4l2loopback video_nr=11 card_label=PhoneCam exclusive_caps=1" | \
sudo tee /etc/modprobe.d/v4l2loopback.conf
If the module is already loaded (OBS loads it for its virtual camera), new options only apply
after sudo modprobe -r v4l2loopback or a reboot.
Over USB instead: adb forward tcp:8554 tcp:8554, then use rtsp://127.0.0.1:8554/cam
with -rtsp_transport tcp.
- Resolution / frame rate / bitrate: 640×480 at 24 fps and 500–1000 kbps is plenty for a video call.
- Key frame every: how fast a glitch heals (default 0.5 s).
- Camera: the back camera is usually sharper and brighter.
- Brightness: raise it in a dim room (brighter, but grainier).
- Packet size: leave at 1400 unless you're testing.
- Meeting app doesn't see the camera: start the ffmpeg command first, then reload the page.
- Dark picture: put a light in front of you, use the back camera, or raise Brightness.
- Delay: use the low-delay flags above; most delay is the player buffering.
- Stops with the screen off: allow PhoneCam to run in the background (Battery → No restrictions).
- Logs:
adb logcat -s PhoneCam/Encoder PhoneCam/Rtsp PhoneCam/Rtp PhoneCam/Service
You need:
- JDK 17 or newer to run Gradle, e.g. Eclipse Temurin. If your JDK isn't 17, Gradle downloads a JDK 17 for the build by itself.
- Android SDK: easiest through Android Studio, or the
command-line tools alone. Accept the SDK
licenses once (
sdkmanager --licenses) so Gradle can fetch the parts it needs (Android 36 platform and build tools).
Point the build at your SDK with ANDROID_HOME, or a local.properties file containing
sdk.dir=/path/to/Android/Sdk, then:
./gradlew assembleDebug # APK in app/build/outputs/apk/debug/app-debug.apk
./gradlew installDebug # or build and install on a phone connected over USB
For installDebug, turn on Developer options → USB debugging on the phone. On Xiaomi phones,
also turn off Developer options → MIUI optimization, or the install fails with
INSTALL_FAILED_USER_RESTRICTED.
There's no password: anyone on your network can open the stream. Use it on networks you trust, and stop it when you're done.
Requires Android 9+. No audio.
